You asked: How do you put battens in a sail?

Which way do sail battens go?

Make sure the battens are inserted with the tapered (thin) end towards the luff and the stiffer (thick) end towards the leech.

How do sail battens work?

The battens force the luff of the sail into the back of the mast. The sail slides that attach the sail to the mast are loaded up, creating friction, and causing them to twist and toggle in the groove.

How do I adjust my sail battens?

The battens are tensioned using the hex-key tool found under the Velcro tab above the tack handle. Insert the hex-key into the cap screw at the leech end of each batten. Turn the hex-key to the right (clockwise) to tighten. You should see a smooth reflection, with no wrinkles alongside the battens.

How tight should sail battens be?

You don’t want the batten to be so stiff that it doesn’t pop through onto the next tack. My rule of thumb on the dock is to tension the batten until the Rocket retainer loop on the leech end of the sail is snug and can’t come loose.

How tight should battens be?

I always just put them in snug and let them be unless a wrinkle popped up. All the batten should really be doing is accentuating the cut of the sail and making the sail a smooth, wrinkle-free surface.

THIS IS INTERESTING:  Do you get wet on a sit on top kayak?

Can you sail without battens?

Battens are absolutely needed on any sail that has any positive roach. This means sailcloth that is over the direct line between the head and the tack. Any such sailcloth cannot be tensioned by sail trim, and will flap uncontrollably when sailing unless the area is stiffened with battens.

What material are battens made from?

Wooden Board and Batten Siding

  1. Cedar. Planks made of cedar are the most popular for wooden board and batten siding. …
  2. Pine. Pine is an inexpensive option for those that wish to have real wood for their board and batten siding. …
  3. Redwood. …
  4. Hemlock. …
  5. Locust. …
  6. White Oak. …
  7. Cypress.

How are sail battens measured?

First, measure the batten pocket from the leech to the end of the pocket. Second, measure the batten pocket from the leech to the edge of the luff of the sail. When designing your sails our designers build an entire cross section of your rig including your leech, luff and foot in a full outline of the sail.